Top of page
Start of header

Aichi tokei denki co., ltd.

  • Home
  • Contact
  • Japanese


Contents Start

Products

TBX Series

TBX Series

Feature

Compact, high accuracy, and lowcost.The stylish body is full of your needs.

Turbine gas meters TBZ and TBX series, developed to measure gas consumption of a small boiler, an individual furnace, or other individual gas equipment, are achieved to have high accuracy consists with the light-weighted compact stylish body.
They can widely correspond to maximum working pressure and maximum measuring flow-rate.
The built-in 2-systems pulse transmitter allows your configuration of a remote reading system or of an advanced energy management system. Also, TBZ series even offers temperature / pressure compensation function that is to display gas consumption converted to its volume at the standard conditions (0,1 atms ), etc.

  • Lowcost and compact-size comparing with conventional gas meters
  • Measuring all uray of ±1%FS (Full Scale) and ±3%RS (Reading Scale)
  • Wide correspondence to maximum working pressure*
  • Free installation position
  • Built-in 2-systems pulse transmitter
  • Various measurable gases
  • Liquid crystal display wherewith many information can be confirmed
  • Temperature/pressure compensation function (Selective)
  • 7 years of non-stop operation

* From low pressure to medium / high pressure

System Examples

Overview

Model TBX30 TBX100 TBX100F TBX150F
Flow-rate range (m3/h) 4-30 10-100 10-100 12.5-150
Max. working pressuse(kPa) 100kPa (Approx. 1.0kgf/cm2)
Accuracy Flow measurement section ±1%FS
Arithmetic display section -
Display Integrated flow LCD 8 digits, Minimum reading 10 liters LCD 8 digits,
Minimum reading 100 liters
Trip LCD 6 digits, Minimum reading 10 liters LCD 6 digits,
Minimum reading 100 liters
Instantaneous LCD 4 digits, Minimum reading 0.1m3/h LCD 3 digits,
Minimum reading 1m3/h
Temperature -
Pressure -
Temperature/
pressure compensation
-
Connection Rc1 1/2,
Rc1 1/4
Rc2 2B Flange(JIS10K)
Applicable temperature 0 to 60°C -10 to 60°C
Installation position Horizontal,Vertcal
Measurable gases * Natural gas,LPG,Air, etc.
Battery Built-in lithium battery with a life of 7 years (Approx)
Output pulse 2-systems open collector output (Unit pulse, high density)
Installation Indoor
Casing material Aluminum alloy Cast iron Aluminum alloy
Weight (kg) 0.8 1.8 7.0 2.5
  • * Please avoid installing the meter in a place where carbonate substance (C5 or above) from LPG or City Gas, oil mist, and/or dust powder, etc., waft.

Dimensions

External Dimensions

TBX 30/100

TBX 100F/150F

  L H W
TBX30 170 74 73
TBX100 200 100 85
TBX100F 200 161 Φ155
TBX150 200 148 Φ155

Manual for Selecting Aichi Turbine Gas Meter Model TBZ Series and TBX Series

MODEL TBZ SERIES

For TBZ series, there are models that have temperature / pressure compensation function. This function is to convert measured actual gas flow to gas flow at certain temperature and / or pressure condition for display, as gas volume changes by variation of temperature and pressure. The relationship between TBZ model and temperature / pressure compensation function is as the following table.

Model Temperature / Pressure Compensation Function
TBZ***-0 Actual Flow (No Temperature / Pressure Compensation Function), Max. Working Pressure 9.9 kgf/cm2
TBZ***-3.5 With Temperature and Pressure Compensation Function, Max. Working Pressure 3.5 kgf/cm2
TBZ***-9.9 With Temperature and Pressure Compensation Function, Max. Working Pressure 9.9 kgf/cm2
TBZ***-3.5P With Pressure Compensation Function (No Temperature Compensation Function), Max. Working Pressure 3.5 kgf/cm2
TBZ***-9.9P With Pressure Compensation Function (No Temperature Compensation Function), Max. Working Pressure 9.9 kgf/cm2

Normally, temperature / pressure condition at which measured actual gas flow is compensated will be Temperature 0°C and Pressure 1 atm (1atmospheric pressure). However, other value could be set in case it is requested (There are condition to select the value).

Also, at the time of placing order of TBZ series, please kindly select direction of flow from the following table.

Model Direction of Flow
All TBZ Models Left to Right, Right to Left, Upward, or Downward

MODEL TBX SERIES

At the time of placing order of TBX series, please kindly select direction of flow from the following table. For TBX30, please also select nominal diameter from 32mm or 40mm.

Model Direction of Flow
TBX30, TBX100, TBX150F Left to Right or Right to Left
TBX100F Left to Right, Right to Left, Upward, or Downward

Specifications are subject to change without notice.

End of Contents

Contact us